Checking the programmed water
hardness level
^
Switch the dishwasher off with the
On/Off button
s
.
^
Turn the programme selector to the
"12 o'clock" position.
^
Press the Start/Stop button in and
whilst holding it in
switch the
dishwasher on using the On/Off
button
s
.
Keep the Start/Stop button pressed in
for at least four seconds until the
"Start/Stop" indicator light comes on.
^
Turn the programme selector to the
"3 o'clock" position.
The "Wash/Rinse" programme
sequence indicator will flash for the
number of times which corresponds to
the water hardness level which has
been set (see chart).
^
Switch the dishwasher off with the
On/Off button
s
.
Before using for the first time
15
Summary of Contents for ADVANTA SERIES G 2020
Page 58: ...58 ...
Page 59: ...59 ...
Page 60: ...Alteration rights reserved G1020 G1040 G2020 G2040 1106 M Nr 06 702 820 02 en GB ...