![background image](http://html.mh-extra.com/html/miele/advanta-series-g-2020/advanta-series-g-2020_operating-instructions-manual_234509042.webp)
The dishwasher does not fill/drain
Problem
Possible cause
Remedy
The Inlet/Drain check
indicator flashes.
The stopcock is
closed.
Open the stopcock fully.
The dishwasher
stops during a
programme.
The Inlet/Drain
indicator flashes.
Before rectifying the problem you
must:
–
Switch the dishwasher off with
the On/Off button
s
.
Water intake is
restricted.
–
Open the stopcock fully.
–
Clean the water inlet filter (see
"Problem solving").
–
The water pressure at the
intake is lower than 30 kPa
(0.3 bar).
Seek professional advice.
Water outlet is
restricted, water
remains in the wash
cabinet at the end of
a programme.
–
Clean the filter combination.
See "Cleaning and Care".
–
Clean the drain pump. See
"Problem solving".
–
Clean the non-return valve.
See "Problem solving".
–
Remove any kink in the drain
hose.
Problem solving guide
42
Summary of Contents for ADVANTA SERIES G 2020
Page 58: ...58 ...
Page 59: ...59 ...
Page 60: ...Alteration rights reserved G1020 G1040 G2020 G2040 1106 M Nr 06 702 820 02 en GB ...