![background image](http://html.mh-extra.com/html/miele/advanta-g-1180/advanta-g-1180_operating-instructions-manual_234504036.webp)
Check your dishwasher regularly
(approx. every 4 - 6 months). This
way faults and problems can be
avoided.
Cleaning the wash cabinet
The wash cabinet is largely
self-cleaning, provided that the correct
amount of detergent is always used.
If, however, there are limescale or
grease deposits in the cabinet these
can be removed with a dishwasher
cleaner, such as the Miele dishwasher
cleaner (available from the Miele Spare
Parts Department).
Cleaning the door and the door
seal
^
Wipe the door seals regularly with a
damp cloth to remove food deposits.
^
When the dishwasher is being
loaded, food and drink residue may
drip onto the sides of the dishwasher
door.
These surfaces are outside the wash
cabinet and are not accessed by
water from the spray arms. Any
soiling should be wiped off these
surfaces before the door is closed.
E-Cloth
^
A microfibre "E-Cloth" is available
from the Miele UK Spare Parts
Department, which is suitable for
cleaning surfaces such as stainless
steel, glass, plastic and chrome
without the use of chemicals.
Cleaning the control panel
,
Do not use abrasive cleaning
agents, glass cleaning agents or
all-purpose cleaners. Because of their
chemical composition, they could
cause serious damage to surfaces.
^
This should
only
be wiped with a
damp cloth.
Cleaning the door front
,
Do not use any cleaning agents
containing ammonia or thinners.
These would damage the surface
structure.
^
Clean the front using a Miele E-Cloth
or with a suitable cleaning agent for
the type of material the front is made
of. Follow the manufacturer's
instructions.
^
Door fronts made from wood should
only be cleaned using a damp cloth,
and then dried with a soft cloth.
^
Door fronts made of stainless steel
should be cleaned using a damp
cloth and a little washing up liquid, or
a proprietary non-abrasive cleaning
agent designed specifically for use
on stainless steel.
^
To help prevent re-soiling, a
conditioning agent for stainless steel,
such as Neoblank (available from the
Miele Spare Parts Department) can
also be used. Follow the
manufacturer's instructions on the
label and apply sparingly with an
even pressure following the direction
of the grain.
Cleaning and care
36
Summary of Contents for ADVANTA G 1180
Page 58: ...58 ...
Page 59: ...59 ...
Page 60: ...Alteration rights reserved G1170 G1180 G2170 G2180 1106 M Nr 06 702 840 02 en GB ...