Setup - 4
Midway Amusement Games, LLC
Inspection
Unpack the materials from the carton and inspect for obvious signs of damage. Use the checklist to be
sure the kit is complete. You must supply the remainder of the materials required for this conversion.
Part Number
Item
Quantity
[ ] A-23380-33
Touchmaster
®
CPU Board Assembly (processor and VGM electronics)
1
[ ] A-23381
Touchscreen control module (Converts processing signal)
1
[ ] RM-42-01
2” square of hook fastener (To fasten controller to cabinet)
1
[ ] RM-43-01
2” square of loop fastener (To fasten controller to cabinet)
1
[ ] H-23368
Wiring Harness (Connects CPU Board Assembly to speaker, video,
etc.)
1
[ ] H-23379
Adapter Cable (Mates 15-pin to 9-pin connector, if used for cash door.)
1
[ ] 04-12821-1
Marquee Retainer with magnet fasteners.
1
[ ] 31-3443
Cabinet Decal-Left side (Covers existing VGM markings)
1
[ ] 31-3444
Cabinet Decal-Right side (Covers existing VGM markings)
1
[ ] 31-3445
Cabinet Decal-Front-wide (Covers wide VGM markings)
1
[ ] 31-3458
Cabinet Decal-Front-narrow (Covers narrow VGM markings)
1
[ ] 31-3627
Marquee artwork
1
[ ] 16-10089.1
Label-Epilepsy Warning (Affix to VGM front beneath monitor bevel)
1
[ ] 4406-01128-00 6/32” KEPS nut (Affixes ground cable to bracket)
1
[ ] 16-80020-101
Touchmaster Conversion Kit Manual (This publication)
1
[ ] 4008-01003-05 6/32” Machine Screw (Fastens CPU Board Assembly to metal plate)
6
NOTICE
The conversion kit CPU Board Assembly is not interchangable with the
standard Touchmaster
®
CPU Board Assembly. The assemblies look very similar, but
have different part numbers. The incorrect assembly will cause sync and touchscreen
calibration errors.
TOOLS REQUIRED FOR CONVERSION
Philips head screwdriver, flat head screwdriver, safety utility knife, 5/16 nut driver or socket wrench.
