Touchmaster
®
Conversion Kit
Setup - 13
INSTALL GAME ELECTRONICS
1. ORIENT ELECTRONICS Place the Touchmaster
®
CPU Board Assembly behind the cabinet so the
heat sink is near the video monitor. The heat sink should be toward the front left side of the cabinet,
opposite cash door.
2. ADJUST VOLUME Set the master volume control to its middle position. The potentiometer is near
the heat sink. Use a screwdriver to point the arrow toward the front of the cabinet.
VOLUME
HEAT SINK
CONTROL
COMPONENTS ON CPU BOARD ASSEMBLY
3. INSTALL WIRING HARNESS Attach the keyed connectors to the CPU Board Assembly.
CAUTION: UNKEYED CONNECTOR The black connector on the harness is unkeyed
and can accidentally be reversed on the CPU Board Assembly. Make sure that when you
attach the connector, its tabs face inward toward the center of the board.
CONNECTOR
BLACK
HARNESS INSTALLATION
