21
Midtronics B.V. Hoofdveste 6 3992 DG HOUTEN
www.midtronicseurope.com
CHAPTER 13:
TESTER INTERNAL BATTERIES
The Tester uses 6 AA, 1.5-volt batteries (alkaline rec-
ommended) to allow testing of batteries down to
1 volt and supply power while the menu is active. The analyzer
can test batteries down to 5.5 volts when the internal batter-
ies are not functioning.
BATTERY POWER INDICATOR
The square in the upper left corner of the display indicates
the charge level of the battery pack. The square is black when
the battery pack is fully charged. It gradually changes to white
as the charge level declines. The Tester will display a warning
message when the batteries need replacing.
Full
Powered
by test
battery
Decreasing
Low
Figure 7: Power Level Indicator for AA Batteries
REPLACING THE TESTER BATTERIES
1.
Turn the Tester face down.
2.
Press gently on the ridges above the arrow on the battery
compartment cover.
3.
Slide the cover in the direction of the arrow and remove
the cover.
4.
Remove the discharged batteries.
5.
Insert new batteries as shown in Figure 22. Make sure the
positive and negative terminals are positioned correctly.
6.
Insert the door’s tabs into the slots on the analyzer and
slide the door closed, making sure the latch locks.
Figure 22: Battery Replacement
Latch
Press here
Slide in
this direction
