29
•
Conductance value is below the reference value and the percentage of the reference
is below the values for
WARN
or
FAIL
•
The voltage is below the
LOW VOLTS
value
•
The voltage is above 2.5 volts per cell
•
All 480 memory locations have been used
4. Choose one of the following based on the type of testing you are doing:
•
If you are testing jars only, test the next set of jar posts if you have more than one
set of posts or test the next jar in the string. Refer to the test patterns in
“Determining a test pattern.”
•
If you are testing jars and straps, follow the steps in “Attaching the cable to a
strap.”
Attaching the cable to a strap
To attach the cable to a strap:
1. Remove the red probe or clamp from the red (+) terminal.
2. Attach the red probe or clamp at the end of the strap above the black (–) terminal on the
next jar. Refer to Figure 8.
Figure 8. Attaching the cable to a strap
