24
Table 10. Advantages of cables
Probes
Clamps (optional)
Quick testing of jars and straps in a string
Retest without reconnecting
Make contact with small posts or straps
Attach to straps and post and free both
hands to use the analyzer keypad
3. When using the probe cable, do one of the following:
•
Select
AUTO START
from the
SET PARAMETERS
menu to keep both hands free to
hold the probes.
•
Have someone hold the analyzer while you connect the probes to the jars during
testing.
Attaching the cable to the analyzer
To attach the cable to the analyzer:
1. Insert the DB-9 connector at the end of the cable into the cable port at the top of the
analyzer. Refer to Figure 4.
Figure 4. Attaching the cable to the analyzer
2. Tighten the two screws on the sides of the DB-9 connector in the screw holes on the
analyzer with a flat-tip screwdriver.
