15
Adjusting the screen contrast (H. CONTRAST)
To change the screen contrast:
1. Press
or
to scroll to
H. CONTRAST
in the
UTILITIES
menu and press
ENTER
.
2. Do one of the following:
•
Press
to increase the screen shade.
•
Press
to decrease the screen shade.
Setting values in the SET PARAMETERS menu
Introduction
Before testing a string, you need to enter its test parameter values. If you do not set values for the
string in this menu, the analyzer uses the defaults when you test the string. For information about
the defaults and descriptions of the parameter values in the
SET PARAMETERS
menu, refer to
“Menu options” in Chapter 1.
Note:
When you set the values in this menu for a string and then test batteries, you cannot
change settings. To change the values, you must delete the test results for the string.
If you have set parameters for a string and are ready to test it, refer to “Chapter 3: Testing.”
Options
After you access the
SET PARAMETERS
menu, you can:
•
Select a test start mode
(1. AUTO START
or
MANUAL START)
•
Select the test points
(2. JARS ONLY
or
JARS AND STRAPS)
•
Set the string temperature
(3. TEMP:)
•
Set the reference value
(3. REF:)
•
Set the number of volts per jar
(5. VOLTS/JAR:)
•
Set the number of posts per jar
(6. POSTS/JAR:)
•
Edit the string name
(7. EDIT STRING NAME)
•
Return to
(8. MAIN MENU)
LOWER HIGHER
TO SET
CONTRAST
