How the velocity curves are working:
CTRL ASSIGN (
Assign which MIDI CC Controller are used by the faders and v-pots)
Press MIDI/Select and the key below „CTRL ASSIGN“ - after this use the hardware controller you
want to assign – the i2-Stage 88 will recognise the used controller automatically. The display shows
the used hardware controller number and after 1 second the actual MIDI CC Controller which is
working working with hardware fader or v-pot.
You can change the CC controller number by writing a new number with the TEN-keys and
ENTER. By pressing the MIDI/Select once more the new MIDI CC controller will be activated.
Please remember, the i2-Stage 88 uses his own MIDI CC controller numbers. You will find the
complete CC numbers in the table at the end of this manual!
7
1
2
3
4
5
6
7
8
Summary of Contents for i2-Stage 88
Page 24: ...24 ...
