the GM soundbank (000).
Please choose first the soundbank for the 2 zones:
Please check, which bank is active for the LOWER and the HIGHER zone.
Press MIDI/Select and the key below „BANK MSB“ - the keyboard will show the active
soundbank number for the 3 zones, ALL; LOWER and HIGHER. The EMU number is 001, the GM
bank uses the bank number 000.
After every step you can change the bank number by writing a new number with the TEN-keys and
ENTER. In this bank select mode you can only choose between 001 and 000. By pressing the
MIDI/Select once more the new bank will be activated for the chosen zone.
For example:
LOWER zone: „001 and ENTER“for the first bank, the EMU bank – you can use sound numbers
from E1-E64.
HIGHER zone: „000 and ENTER“for the second bank, the General MIDI bank – you can use sound
numbers from 001-127.
Now you can setup the 2 different sounds for the LOWER and HIGHER zone.
Press MIDI/Select and the key below „PROG“ 3 times - the keyboard will show the active sound
number for the 3 zones, ALL; LOWER and HIGHER. After every step you can change the sound
number by writing a new number with the TEN-keys and ENTER. In this PROG select mode you
can only choose between 001-064 in the EMU bank (now in the LOWER) and 001-127 in the GM
bank (now in HIGHER) . By pressing the MIDI/Select once more the new sounds will be activated
for the chosen zones .
To cativate the SPLIT zones, press MIDI/Select again and the key below „SPLIT“. The display
shows ON and OFF.
10
Summary of Contents for i2-Stage 88
Page 24: ...24 ...
