64 sounds. At the end of this manual you can find a complete soundlist of this EMU soundchip and
the General MIDI soundbank of the i2-Stage 88. After choosing a sound, the keyboard will switch
automatically to this sound after 2 seconds and turn back to the Play mode.
Function-keys and the Ten-number keys with CANCEL & ENTER (9,12)
In the Edit Mode (with active MIDI/Select button), you can use some special features for have a
direct access to this functions. You find this keys below the silk print.
PANIC
(stops all MIDI messages if the i2-Stage 88 hangs)
Press MIDI/Select and the key below „PANIC“ – this forces a reset and all MIDI data will be
stopped at once.
SNAPSHOT
(send the actual data via MIDI )
Press MIDI/Select and the key below „SNAPSHOT“ - the keyboard will send all actual MIDI and
controller data via MIDI.
MIDI OUT
(switches the MIDI OUT on and off)
Press MIDI/Select and the key below „MIDI OUT“ - the keyboard will switch the MIDI OUT port
on and off
STORE
(stores the actual settings into a USER PRESET)
Press MIDI/Select and the key below „STORE“ - the keyboard will save all actual MIDI and
controller settings into a user preset. The display shows „Sto“ und „t0x“ - 0x for the number of the
preset place number. You can choose the preset number by using the „TRANSPOSE/PRESET“
Up&Down buttons.
SPLIT
(switches the Split Zone function on and off )
Press MIDI/Select and the key below „SPLIT“ - the keyboard changes between SLIT on and off.
KEYB CHAN
(sets the MIDI channel for ALL, LOWER and UPPER zones)
Press MIDI/Select and the key below „KEYB CHAN“ 3 times slowly – the display switches
between Cxx for the basic MIDI channel – Lxx for the „Lower MIDI channel“ and Hxx for the
„Higher MIDI channel“. You can change the active MIDI channel for each zone by input an new
number with the number keys and ENTER.
For example: To change the basic MIDI channel for the whole keyboard to channel 5, press
5
Summary of Contents for i2-Stage 88
Page 24: ...24 ...
