How to choose the MIDI channels for the keyboard zones:
Press MIDI/Select and the key below „KEYB CHAN“ up to 3 times - the keyboard will show the
active MIDI channel number for the 3 zones,C for ALL; L for LOWER and H for HIGHER.
After every step you can change the MIDI channel number by writing a new number with the TEN-
keys and ENTER. In this „KEYB CHAN“ mode you can only choose between the 16 MIDI
channels 001-016.
How to store your settings into a user setup:
The i2-Stage 88 can store up to 12 different user setups and save your own settings.. You can store
each active setting for the keyboard, MIDI channels, CC controllers etc.
How to use a preset:
By switching the i2-Stage 88 on, the last setup will be active. Press MIDI/Select and use this
TRANSPOSE/PRESET UP and DOWN buttons to change the active user preset number. The
display will show the active preset number as P-01 to P-12. You can use up to 12 user presets.
How to store a preset:
After you have done some settings, press „MIDI/Select“ and choose with the
TRANSPOSE/PRESET UP & DOWN buttons the preset number you want to use.
Then press the key below „STORE“ - your setup will be stored. The display shoiws „t0x“ and
shows the user preset number, which is actually used.
11
Summary of Contents for i2-Stage 88
Page 24: ...24 ...
