How to choose between the General MIDI and the EMU soundbank:
Press MIDI/Select and the keyb below „BANK MSB“ one, two or 3 times.
1:
- A for ALL -the soundbank of the complete keyboard will be chosen.
2:
- L for LOWER -the soundbank of the lower keyboard zone will be chosen.
3:
- H for HIGHER -the soundbank of the higher keyboard zone will be chosen.
After every step you can change the bank number by writing a new number with the TEN-keys and
ENTER. In this bank select mode you can only choose between 001 and 000. By pressing the
MIDI/Select once more the new bank will be activated for the chosen zone.
For example:
„001 and ENTER“for the first bank, the EMU bank – you can use sound numbers from E1-E64.
„000 and ENTER“for the second bank, the General MIDI bank – you can use sound numbers from
001-127.
How to program a single sound to the complete keyboard:
Press MIDI/Select and the key below „PROG“ up to 3 times. The display shows:
1: P-A - the sound of the complete keyboard will be chosen.
2: P-L -the sound of the lower keyboard zone will be chosen.
3: P-H -the sound of the higher keyboard zone will be chosen.
After every step the active sound number will be displayed. Now you can change the sound number
by writing a new number with the TEN-keys and ENTER. In this sound select mode you can only
choose between 001-064 in the EMU bank, and 001-127 in the GM bank. By pressing the
MIDI/Select once more the new sound will be activated for the chosen zone.
Note: you can choose the EMU sounds faster with the EMU direct access keys.
How to setup 2 different sounds into 2 different zones:
You can combine 2 different sounds from the 2 soundbanks and play them simultanious. For
example a bass sound from the EMU bank (001) in the left zone and a Piano in the right zone from
9
Summary of Contents for i2-Stage 88
Page 24: ...24 ...
