PANIC (reset all active MIDI messages)
SNAPSHOT (sends all active MIDI settings into your DAW)
MIDI OUT (switches the MIDI OUT on and off)
STORE (stores the active settings into a user preset)
SPLIT (switsches the SPLIT on and off)
KEYB CHAN (sets the MIDI channels for the 3 zones ALL, LOWER and HIGHER)
BANK MSB and BANK LSB (choose an internal or external soundbank),
PROG (choose a sound program number)
CURVE (change the keyboards velocity curve)
CTRL ASSIGN (assign a hardware fader or v-pot with a CC MIDI controller)
CHAN ASSIGN (assign a hardware fader or v-pot with a MIDI channel)
Keys below 1-9, CANCEL and ENTER (the TEN keys for the number input)
How to setup a single controller
How to setup a CC controller to the 16 faders or v-pots
Press MIDI/Select and the key below „CTRL ASSIGN“ - after this use the hardware controller you
want to assign – the i2-Stage 88 will recognise the used controller automatically. The display shows
the used hardware controller number and show after 1 second the actual MIDI CC Controller which
is working working with hardware fader or v-pot.
You can change the CC controller number by writing a new number with the TEN-keys and
ENTER. By pressing the MIDI/Select once more the new MIDI CC controller will be activated.
Please remember, the i2-Stage 88 uses his own MIDI CC controller numbers. You will find the
complete CC numbers of the i2-Stage 88 in the table at the next side of this manual!
14
Summary of Contents for i2-Stage 88
Page 24: ...24 ...
