2
HARDWARE SPECIFICATIONS
Operating Voltage
4.75-8.2 VDC
Operating Current
During satellite acquisition
60 mA typical
After latitude and longitude have been acquired
40 mA typical
GPS power save 8 mA typical
Operating Temperature
-30 - +60 C
Frequency Response
300-3000 Hz**
Input Impedance
>45 k
Ω
Input Level (TX)
0.05-2.5 VPP
Input Level (RX)
0.05-2.5 VPP
Audio Output Impedance
< 1200 Ohm
ANI SPECIFICATIONS
Midian’s FMP Unit ID Range
00000-FFFFF
Midian’s FMP Group ID Range
000-FFF
Midian’s FMP ANI Timing with Coordinates
413 msec
Midian’s FMP ANI Timing without Coordinates
200 msec
SECURITY SPECIFICATIONS
GPS-2 IC-2:
Number of Selectable Keys
16
Inversion Frequency Range
2100-4100 Hz (0-15 Hz resolution
5B
INSTALLATION OVERVIEW
1. Test the radio for functionality.
2. Program the radio per the Radio Programming Section of this manual.
3. Install the GPS-2 board, GPS antenna (portables only) and antenna cable into the radio per the installation
section of this manual.
4. Program the GPS board per the Product Programming Section of this manual.
Note: Midian is not responsible for any damage/loss resulting from the use of Midian’s products
