12
for each of the audio hookup points. Adjust the slider bar such that the value appearing in the appropriate column
matches what was measured as closely as possible.
Midian recommends the following values at 60% modulation in the mVpp column:
Radio Model
RX In
TX In
RX Out
TX Out
F-3021, F-3023, F-4021, F-4023
600
30
600
30
F-3161, F-4161,
450
42
636
42
F-5061, F-6061
546
120
546
120
F-9511
660
48
660
48
RADIO PROGRAMMING
For all the radios listed below the term Mode will refer to scramble/clear, inversion code select or Lone-Worker
on/off functions, depending on how the GPS-2 board is programed.
F-3021, F-3023, F-4021, F-4023:
For mode select, program the desired button under Common > Key & Display as OPT1 Momentary/L (Active
Low).
If using Emergency ANI, under Common > Key & Display set the Emer button as OPT 3 Out/L. The GPS-2 IC-2
will key the radio and transmit the programmed ENI for the programmed number of times, GPS location is only
available if using the Midian FMP w/GPS signaling option.
F-5061, F-6061 and F9511:
For mode select, program the desired button under Common > Key & Display as OPT1 Momentary/L (Active
Low).
If using Emergency ANI the GPS-2 board needs Mod 1476 and the radio needs the PTT modification (see
technical notes on next page), under Common > Key & Display set the Emer button as OPT 3 Momentary/L
(Active Low). GPS location is only available if using the Midian FMP w/GPS signaling option.
