![background image](http://html1.mh-extra.com/html/midea/pho15a2agb/pho15a2agb_service-manual_1791235013.webp)
维修手册
Service Manual
, 2017 v1.0
13
/
17
3.18
电检
Electric inspection
按要求测试整机接地电阻、耐压、功率;
Test the grounding resistance, voltage
resistance and power of the whole machine as
required;
4.
常见及解决方法
Fault code and solutions
故 障 代
码
Fault
code
故 障 内 容
Fault
content
代 码 可
见
Code
visible
原因
Cause
维修方法步骤
Steps for maintenance methods
1
风 叶 不 转
The blades
did not turn
风 叶 可 能 卡
住
Wind
blades can get
stuck
将暖风机拆开,将线束用扎带固定好,将其与风叶隔
开。
Take the heater apart, tie the cord and tie it well,
separate it from the wind blade.
2
通电不工作
Power
on
not working
机 器 内 部 有
问题
There
is
something
wrong
with
the machine
1.
将暖风机拆开,观察限温器是否跳开,如果是则
待机器自然冷限温器复位,再开机。
2.
若限温器
未跳断,则拔掉电源,检查线束端子是否有松脱
(最好使用万用表),然后接上线束端子。
1. Disassemble the heater and observe whether the
temperature limiting device is switched off. If it is, reset
the natural cold temperature limiting device and turn it
on.
2. If the temperature limiting device does not break,
unplug the power, check whether the wire harness
terminal is loose (multimeter is preferred), and then
connect the wire harness terminal.