维修手册
Service Manual
, 2017 v1.0
11
/
17
corresponding hole position of the control
panel/control box;
3.12
安装控制面板
Install control panel
取一
M6
螺钉放入控制箱孔中；
将控制面板压入控制箱对应安装孔位中；
使用十字螺丝刀
/
电批锁紧控制面板固定螺
钉；
Put an M6 screw into the hole of the control
box;
Press the control panel into the corresponding
installation hole of the control box;
Use cross screwdriver/batch lock control panel
to fix screws;
3.13
安装收线板
Install the take-up board
将收线板压入控制箱对应安装孔位中；
使用十字螺丝刀
/
电批锁紧收线板固定螺钉；
Press the wire take-up plate into the
corresponding installation hole position of the
control box;
Use a phillips screwdriver/batch lock to set the
wire tray screws
3.14
扎线
bundle
将内部导线理顺，使用扎带将内部导线按要
求扎好，避免内部导线凌乱或贴近控制箱散
热孔；
Straighten out the internal wire, tie up the
internal wire as required with the band, avoid
the internal wire messy or close to the heat
dissipation hole of the control box;
