Midea PHO15A2AGB, Service Manual

Page: 9 / 17

维修手册
Service Manual , 2017 v1.0
9 / 17
seat;
2. Use a phillips screwdriver to fix the
porcelain seat on the corresponding position of
the control box or control box with screws;
3.5
安装出线胶圈、电源线
Install outgoing gasket and power cord
使用螺丝刀将出线胶圈压入控制箱安装孔
中，取电源线从控制箱外穿入出线胶圈孔中；
Use a screwdriver to press the outgoing apron
into the mounting hole of the control box, and
take the power cord from the outside of the
control box into the outgoing apron hole
3.6
安装瓷座螺母
Install porcelain base nut
1
、将两对应的环形接线端子套在螺钉上，套
入Φ
4
弹性垫圈，拧上
M4
螺母；
2
、使用专用套筒将螺母拧紧；
1, the two corresponding ring set on the screw
terminals, set into the Φ 4 elastic washer,
screw on the M4 nut;
2. Use special sleeve to tighten nuts;
3.7
安装压线板
Install pressure plate
取一压线垫板，压入安装孔中；
取一压线板，穿上螺钉，使用螺丝刀将压线
板固定在控制箱上；
Take a pressure wire pad and press it into the
installation hole;
Take a pressure line plate, put on a screw, and
use a screwdriver to fix the pressure line plate
on the control box;