维修手册
Service Manual
, 2017 v1.0
10
/
17
3.8
插线
plug wire
将内部导线端子按要求插入对应的零部件
上；
Insert the terminals of the internal wire into
the corresponding parts as required;
3.9
安装接地螺钉
Install ground screw
取接地螺钉套上Φ
4
弹性垫圈，套上接地线环
形接线端子，再套上外齿垫圈，使用十字螺
丝刀将螺钉固定在控制箱对应孔位上；
Take grounding screw on Φ 4 elastic washer, on
earth wire ring terminals, combined with
external tooth washers, use the screwdriver to
screw on the control box corresponding hole
location;
3.10
安装旋钮
/
旋钮组件
Install the knob/knob assembly
取相对应的旋钮，按扁轴方向安装在对应的
位置上；
Take the corresponding knob and install it in
the corresponding position according to the
direction of the flat axis;
3.11
安装指示灯
/
指示灯组件
Install indicator/indicator assembly
将指示灯穿至指示灯罩孔中，将导线压入固
定卡槽中；
将指示灯组件压入控制面板
/
控制箱对应孔
位中；
Put the indicator light through the hole of the
indicator lamp shade and press the wire into
the fixed card slot;
Press the indicator component into the
