![background image](http://html1.mh-extra.com/html/midea/pho15a2agb/pho15a2agb_service-manual_1791235012.webp)
维修手册
Service Manual
, 2017 v1.0
12
/
17
3.15
安装限温器
Install thermostat
取对应的限温器放入限温器支架上,使用十
字螺丝刀
/
电批锁紧固定螺钉;如需导热硅脂
需涂上导热硅脂;
取对应限温器装入限温器支架上,涂上导热
硅脂,将限温器支架卡入壳体安装孔位中;
Place the corresponding temperature limiter
on the bracket of the temperature limiter, and
use the phillips screwdriver/electric batch to
lock the fixing screw;If the heat-conducting
silicone grease is needed, the heat-conducting
silicone grease shall be coated;
Take the corresponding temperature limiter
and mount it on the temperature limiter
bracket, coat it with heat-conducting silicone
grease, and clip the temperature limiter
bracket into the shell installation hole position;
3.16
插发热管限温器端子
Insert heating pipe temperature limiter terminal
将对应端子插入发热管和限温器接插片上;
Insert the corresponding terminals into the
heating pipe and the splice of the temperature
limiting device;
3.17
紧固控制箱
Tighten the control box
使用十字螺丝刀
/
电批锁紧控制箱对应的固
定螺钉;
Use a phillips screwdriver/batch to lock the
fixed screws corresponding to the control box;