–
5
2
–
Note:
When reinstalling the nozzle to the gasket, it
may be helpful to remove the nozzle from the hose.
Gasket Outside
Gasket Inside
Washer
Indent
. Loosen the 7-mm bolt that holds the wire and
bolt assembly to the outer tub lip. Remove the
wire and bolt assembly from the tub gasket.
Note:
When reinstalling the wire and bolt, tighten
to a gap of approximately 1
1
/
4
inches (as shown). Do
not overtighten.
.
Wire and Bolt Retainer
1
1
/
4
-in. Gap
Pull the tub gasket off the outer tub lip.
5.
Outer
Tub
Lip
Note:
When reinstalling the tub gasket on the
outer tub, align the notch in the gasket with the
arrow located on the top of the outer tub lip before
tightening the wire and bolt assembly.
Arrow
Notch
3
Nozzle
4. Pull the tub gasket off the outer tub lip.