Error Code
Description
Problem
Possible Cause/Action
E
30
the lock failed to
lock
the washing
machine tried
to lock the door
three times.
•
1. close the door
2. check the door lock
3. the machanical connection of the door lock
4. switch the power line and the zero line
5. change the motor
E
34
NTC fault
the washing
heating
temperature
sensor fails to
open.
•
•
E
33
water level
sensor error
water level
sensor
frequency is not
in the specified
range.
•
The water level sensor is not connected,check
the connection of the water level sensor
• Power down (unplug) washer, wait 30 seconds and
retry - use whites cycle sanitize temperature - if
reoccurs, replace
the water level sensor
. (Note:
Cannot occur
with open winding.)
E
36
washing heating
tube alarm
•
After the error was found,the washing machine
recorded the error and went to work.
•
1.check the heating tube
2.check NTC sensor
the washing
machine
heating tube
does not
heat when
washing
and heating.
E
80
Communication
fault alarm
after washing
machine initial
charge,no
communicatia
on between
main control
board and
display board.
•
The washing machine can not work.
•
1. check communication wire
2. the computer board communication mode is
damage or not.
E50/E52
the inverter
overflows
the inverter
overflows
•
change the inverter.
–
6
0
–
After the error was found,the washing machine
recorded the error and went to work.
check the wiring of the heating tube sensor.
E50/E53
inverter board
temperature
sampling error.
inverter board
temperature
sampling error.
•
change the inverter.
E64
Inverter failed
Inverter
Communication
failed
communication
data abnormal
check inverter or main control board
check the connection of the wire.
•
•
