Middleby Marshall PS629G Series, Owner'S Operating & Installation Manual

Page: 6 / 52

SECTION 1
DESCRIPTION
6
II. PS629G SERIES SPECIFICATIONS
RECOMMENDED MINIMUM CLEARANCES
There are no recommended clearances from the rear, control end, or non-control end of the oven to the wall.
PS629G SERIES OVEN SPECIFICATIONS
Heating
Zone
Baking
Area
Belt
Length
Belt
Width
Overall Length
exit trays
installed
Height
4" legs
installed Depth
Maximum
Operating
Temp
Bake
Time
Range Ship Wt
Ship
Cube
PS629G-1 29"
737mm
3.5 ft 2
0.33m 2
50"
1270mm
18"
457mm
68"
1727mm
21.00"
533mm
40.74"
1035mm
600°F
316°C
1-10 min 325 lbs
147.42kg
22.1 ft 3
0.62m 3
PS629G-2 58"
1473mm
7 ft 2
0.66m 2
50"
1270mm
18"
457mm
68"
1727mm
36.55"
930mm
40.74"
1035mm
600°F
316°C
1-10 min 650 lbs
294.48kg
44.2 ft 3
4.25m 3
PS629G-3 87"
2210mm
12.25 ft 2
0.99m
2
50"
1270mm
18"
457mm
68"
1727mm
52.09"
1322mm
40.74"
1035mm
600°F
316°C
1-10 min 975 lbs
442.25kg
66.3 ft 3
1.86m
3
SERIES PS629G ELECTRICAL SPECIFICATIONS
Version Voltage Phase Freq Current Draw* Supply Breakers
Domestic and
std. export
208/240V 1 50/60 hz 2.0A 2 pole, 3 wire As per local
codes
* The current draw ratings shown above are maximum values for normal operation, amperage draw will be less than the listed value.
NOTE: Each oven includes a 6 ft cord with NEMA# L6-20P plug. Customer to provide NEMA# L6-20R receptacle.
SERIES PS629G GAS SUPPLY SPECIFICATIONS
Version Gas Type Supply (inlet) Pressure Regulated Pressure Rated Heat Input
Domestic & std export Natural Gas 6-8" W.C. (14.9-19.9mbar) ** 3.5" W.C. (8.72mbar) 50,000 BTU
Domestic & std export Propane Gas 11-14" W.C. (27.4-34.9mbar) ** 10" W.C. (24.9mbar) 50,000 BTU
** The gas supply pressures and orifice sizes shown are for ovens installed in North America. The required gas supply pressures and orifice sizes
of ovens installed in other locations are dependent on the local gas type and on all applicable local codes.
NOTE: Wiring Diagrams are contained in Section 6 of this Manual and are also located inside the oven at the bottom
of the Control Panel. Additional electrical information is provided on the oven’s serial plate.
This Manual Must Be Kept For Future Reference.