146
9. Host computer waveform control area
Waveform control area button has the same function with that
button on the oscilloscope
13.1.4 Operation Interface Introduction
The host computer and the oscilloscope are synchronously displayed, and the waveform operation mode and the
menu opening and closing mode are the same as those on the oscilloscope; the left mouse button and the single
finger operation mode are the same, and both of them can perform the operations of slide, click, drag, etc.; the
biggest difference of host computer and oscilloscope is the scroll wheel operations, which can move waveform
and cursor, adjust trigger level, and horizontal time base.
Scroll wheel operation
introduction:
1. Operate the scroll wheel on the waveform display to move the
current
waveform;
2. After opening the cursor, operate the scroll wheel to move the
current
cursor;
3. Click the trigger level button, and operate the scroll wheel to adjust the trigger level.
4. Put the mouse in the time base adjustment area
and adjust the horizontal time base by
operating the scroll wheel;
13.1.5 Storage and View of Pictures and Videos
Storage setting of pictures and videos:
Open the host computer storage setting
, set the storage location of pictures and videos, as shown in the
figure below:
Figure 13-3 Host Computer Storage Setting
Pictures are stored in the local directory C:\Users\Public\Pictures by default. We can also store them under the
directory defined by ourselves according to our own needs. For example, we store pictures in a “mini photo”
directory under E-drive disk. We can set the video storage location in the same way, then click OK.