D R Y S I R E N
U s e r ´ s a n d i n s t a l l a t i o n m a n u a l
|
65
P a g e 6 5 o f 6 8
V e r s i o n : 0 1 / 2 0 1 8
SW
IM
M
IN
G
P
O
O
L
D
EH
U
M
ID
IF
IE
R
D
R
Y
S
IR
E
N
6.
Chemical conditions in the pool or pool hall have not been within the defined borders (
please
see below table Allowed chemical conditions
).
7.
The dehumidifier suffered frost or overheating damage resulting from ambient air
temperatures out of Temperature operational range.
8.
The electric tension source is insufficient or improper in any other way.
Allowed chemical conditions:
Acidity / pH level:
pH
7,4 +/- 0,4
Total alkalinity, as CaCO3
ppm
80-120
Total hardness, as CaCo3
ppm
100-300
Total melted dry mass
ppm
max. 3000
Maximal saline content
wt/wt
6%
Free chlorine range
ppm
1,0-3,0
Superchlorination
ppm
max. 30 ppm/max. 24 hours
Bromine
ppm
2-3
Baquacil
ppm
25-50
Ozone
ppm
0,8-1,0
Maximum copper content
ppm
max. 2
Aquamatic single purifier
ppm
max. 2
Tarn clean purifier
ppm
max. 2
Sherwood purifier
ppm
max. 2
Table: Allowed chemical conditions
TRANSPORT INSTRUCTIONS
When applying for warranty, please contact your distributor and indicate dehumidifier
model and serial number. Please describe the genesis of the failure.
The compressor unit must be transported in the original packaging only and
in a
vertical upright position
. Make sure that the compressor unit cannot
turn over or fall down during transport. Never put the compressor unit aside!
It may lead to serious compresso
r damage, unit’s malfuction, damage or
failure. This is warranty void.
No mechanical damage is accepted as warranty claim unless a written claim
had been made with transporting agent delivering the device. When
receiving the product please check whether the package is not damaged.
Please make a proper
documentation of any damage immediately after delivery and claim all
transport damage in written form with the forwarding agent at the delivery.
