34 ArtixScan DI 2125c User's Manual
NOTE:
1. When you have finished the settings for the function button in the interface,
you have to exit interface before you perform the predefined scanning task
by pressing the function button on the scanner.
2. If ScanWizard DI is launched and the Main interface (AP control panel) is
activated on the screen, the scanned image files will appear in the Thumbnail
View window for your viewing after you perform the scanning task by
pressing the function button on the scanner.
How the Function Button Works
When you finish customizing the function button, follow the steps below to
perform the scanning task by pressing the function button on the scanner. The
scan will be performed in accordance with the designated button function using
the parameters configured in the Scanner Button Settings interface.
1. Load the document to be scanned into the document feed tray of the
scanner.
2. Exit the Scanner Button Settings interface.
3. Press the F1 button your scanner to activate the function associated with
the F1 button easily.
4. If necessary, specify new settings for the F1 button. Follow the procedures
(steps 1 through 5) for the “Customizing the Function Button” section to
specify your new requirements for the F1 button.
