Microscan Quadrus MINI, User Manual, Page: 223 / 424

Quadrus MINI Imager User’s Manual
7-43
I/O Parameters
Power On/Reset Counts
Note: Power On/Reset Counts is a read-only command.
Power-On
Power-On uses a 16-bit counter that increments each time the imager is powered-on.
Resets
Resets uses a 16-bit counter that increments each time the imager is reset. This value is
reset at power-on.
Power-On Saves
Power-On Saves uses a 16-bit counter that increments each time an imager setting is
saved for power-on with a
<Z> command.
Power-On Flash Saves
Power-On Flash Saves uses a 16-bit counter that increments each time an imager setting
is saved to the customer parameter section of flash memory with a
<Zc> command.
Serial Cmd:
< K406,power-on
,resets,power-on saves,power-on flash saves>
Serial Cmd:
< K406,
power-on,
resets
,power-on saves,power-on flash saves>
Serial Cmd:
< K406,
power-on,resets,
power-on saves
,power-on flash saves
>
Serial Cmd:
< K406,
power-on,resets,power-on saves,
power-on flash saves >