Microscan Quadrus MINI, User Manual, Page: 191 / 424

Quadrus MINI Imager User’s Manual
7-11
I/O Parameters
1D/Stacked Symbology Qualification
Note: 1D/Stacked Symbology Qualification is not supported when Q-Mode is enabled.
Minimum Number of Bars
Minimum Number of Qualified Scan Lines
Start/Stop Status
Definition:
Sets the minimum number of bars to qualify linear symbols.
Serial Cmd:
< K717,minimum number of bars
,minimum number of qualified scan
lines,start/stop status
>
Default:
0
Options:
0 to 255 (0 = disabled)
Definition:
Sets the minimum number of scans that have the required number of
bars set in Minimum Number of Bars.
Note: This is a percentage value, from 0 to 100.
Serial Cmd:
< K717,
minimum number of bars,
minimum number of qualified scan
lines
,start/stop status
>
Default:
Disabled
Options:
0 to 100 (0 = disabled).
Definition:
When enabled, both Start and Stop characters need to be present to qualify
as a decodable symbol. In the case of PDF417, only a Stop needs to be
present.
Note: This parameter does not apply to UPC, GS1 DataBar (RSS),
MicroPDF417, or Pharmacode.
Serial Cmd:
< K717,
minimum number of bars,minimum number of qualified scan
lines,
start/stop status >
Default:
Disabled
Options:
0 = Disabled 1 = Enabled