MicroPower SLV-C306-1011-IR, Installation Manual, Page: 6 / 40

MicroPower Technologies
1-877-536-0128 | micropower.com
6
Hub Connection Method
RTSP Streaming
The hub communicates to your VMS using h.264 RTSP streaming. In order to operate correctly, an IP address will
be needed for the hub, plus, and additional IP address will be utilized to represent each camera on the hub.
To access the individual video streams, one will use the unique IP of the camera, while the trailing URL remains
consistent. (See illustration on right)
In the event of a camera outage, the IP address representing that camera can be disabled after a user defined
period of time. This allows a VMS system to detect the camera loss (IP is no longer accessible, and can no longer be
pinged) and send the appropriate alerts or scripted actions.
Note that the individual cameras are never actually a part of a given computer network. The IP addresses are
operated and maintained 100% inside the hub, and only represent the camera video streams.
NOTE : When settign up a camera, you should enter the IP address of each Solveil camera at that time. Do not
leave the field blank or use the same IP address that is assigned to the hub.
Ethernet Switch
VMS Server
VMS Display Monitor
Antennas
Antennas
Antennas
MiniHub
rtsp ://192.168.1. 101 :554/h264/1/media.amp/trackID=1
http://192.168.0.100
http://192.168.0. 105
rtsp ://192.168.1. 102 :554/h264/1/media.amp/trackID=1
rtsp ://192.168.1. 103 :554/h264/1/media.amp/trackID=1