MicroPower SLV-C306-1011-IR, Installation Manual, Page: 22 / 40

MicroPower Technologies
1-877-536-0128 | micropower.com
22
Solar Panel Assembly
The solar panel bracket is extremely versatile, and is assembled based upon the mounting surface that it will be
attached to. The “C” shaped bracket can be bolted to the solar panel with the flat side facing out (for bolting/
screwing to smooth surfaces), or with the edges of the bracket facing outward (for mounting using straps/hose
clamps to poles). The panel may be mounted to poles, walls, or even inverted and mounted to rooftops or ledges.
(See images).
Bracket configured for mounting to a round or square pole by
use of hose clamps / straps. (straps through the slots in bracket)
Assembly of the bracket, and the arrangement of the nuts, bolts, and washers.
Bracket configured for mounting to a flat surface such as a wall,
by use of screws or bolts
Solar bracket configured for mounting down, to a flat surface
such as rooftop or ledge with the solar panel facing upward.
Solar panel mounted to a pole using stainless steel hose clamps that are passed through the
slots in the bracket. This allows for a quick, non-permanent installation that may be easily
relocated, without damaging the mounting surface.