MicroPower SLV-C306-1011-IR, Installation Manual, Page: 20 / 40

MicroPower Technologies
1-877-536-0128 | micropower.com
20
System Administration
Changing The Login and User Accounts, Saving Configurations, Factory Default
Edit Login: This section allows the operator to password protect the video streams and camera settings. (Note:
password protecting the video streams may compromise VMS compatibility, depending on the make and model)
Add User: Adds new users to the system, allowing the administrator to secure the box, and allow specific intended
people access fto make changes, or see the settings.
Settings: Allows the operator to save the current hub configuration to their local computer, or, to load a saved
configuration file to a hub. This can be used to restore a configuration to a hub that has been factory defaulted.
Factory Default: Clears the settings in a hub, and returns it to the factory default settings.
NOTE: Remote users should be certain to check the “preserve IP Settings” option, so that after the factory default,
the programmed IP address will still remain in the system. Otherwise, the hub will return to it’s default IP address
of 192.168.0.100, and potentially become inaccessible from a remote connection.
System Logs: This feature will save the system logs that are stored in the hub. The log data contains information
about the performance of the hub, signal strengths, charge levels, etc. (No images or video clips are stored or
transmitted) This information is useful to provide to MicroPower for trouble shooting purposes.
System Logs Daily Sync: If the hub has internet access, checking this box will instruct the system to upload the log
data nightly to the MicroPower offices. This is useful in the event of a problem, MPT will already have the previous
nights logs on hand for review and analysis. “Send Log to MicroPower” will cause the system to immediately being
uploading the log data to the MPT offices for analysis and troubleshooting.