46 Handling of Consumables
_________________________________________________________________________________________
_________________________________________________________________________________________
Microplex
logiJET TC8
Edition 1.2
3.
Unlock the printhead assembly by pushing the release
lever.
Fig. 5.2.2.b Releasing the printhead assembly and swivelling it upward
4.
Swivel the printhead assembly upward until it stops and
stands upright.
5.
Take the two ribbon mandrels out of the printer and adjust
them to the width of your new ribbon.
(A detailed description of this prodedure can be found in the
previous section).
b
a
a
b
Printhead release
lever
Rear printhead
assembly
