134 Panel Functions
_________________________________________________________________________________________
_________________________________________________________________________________________
Microplex
logiJET TC8
Edition 1.2
7.25. Print Speed Adjustment
This function is used to change the print speed (adaptation to the
actual used materials, e.g. to optimize the density of the printout).
The setting range for the print speed is 2 inch/s to 6 inch/s.
Panel display
[ON LINE ]
[Menu level 1 ]
[Engine ]
[Printspeed ]
[ 6 inch/s ]
[ 4 inch/s ]
[Save as Setup? ]
Notes
Turn the printer OFF LINE with this
key.
Press the NEXT or PREVIOUS key
until [Engine ] is displayed.
The currently set value is displayed.
Press the NEXT or PREVIOUS key
until the desired value is displayed.
Here the print speed is reduced to 4
inch/s.
In addition this new value can be
saved as setup value (using the
ENTER key).
After this decision turn the printer
ON LINE again: Press the ON LINE
key longer than 2 seconds.
