Panel Functions 111
_________________________________________________________________________________________
_________________________________________________________________________________________
Microplex
logiJET TC8
Edition 1.2
7.6. Material Width Adjustment (Paper Width)
The paper width (print width) has to be adjusted with this function
according to the currently used format. ). The setting range for the
paper width is from 100 mm up to 228 mm (219 mm printable).
Panel display
[ON LINE ]
[Menu Level 1 ]
[Paper Menu ]
[Paper Size ]
[Paper Length ]
[Paper Width ]
[in mm ]
[Digit4 108.4]
[Digit1 108.0]
[Save as Setup? ]
Notes
Turn the printer OFF LINE with this key.
Press the NEXT or PREVIOUS key until
[Paper Menu ] is displayed.
Press the ENTER key to select the paper
menu.
Press the ENTER key to select the paper
size menu.
Press the NEXT or PREVIOUS key until
[Paper Width ] is displayed.
Press the ENTER key to adjust the format
width to the paper width.
mm = currently selected measuring unit.
(Alternative the units inch or 1/300 inch
can be chosen with NEXT or PREVIOUS).
Pressing the NEXT or PREVIOUS key
changes the value of the current digit
(Digit4 = left position, in this example: 1).
Pressing the ENTER key moves you to the
next digit (the ESC key moves you back, if
need be).
The format width (paper width) is changed
to 108.0 mm.
In addition this new value can be saved as
setup value (using the ENTER key).
After this decision turn the printer ON
LINE again: Press the ONLINE key longer
than 2 seconds.