Micronova S.r.l.
-
Via A. Niedda, 3
-
35010 Vigonza (PD)
-
+39 049 8931563
-
+39 049 8931346
date 22.05.2018
Control board O047+T047idro
Micronova
page 93 of 113
ENG
T
E
C
H
N
IC
A
L
M
E
N
U
10.2 M
-
9
-
2 General settings
This menu shows more parameters that you can edit. Press P3 to scroll through configu-
ration parameters (M
-
9
-
2
-
01) to (M
-
9
-
2
-
17), see
APPENDIX A
. To modify value press
P1 or P2; to confirm and continue press P5 or P6. You can exit the menu by pressing P4.
N.B. Key Lock function M
-
9
-
2
-
10
When the parameter key lock is enabled, the display console allows you to lock or un-
lock the keys. Pressing sequentially from the home screen P3 and then P4, the command
is activated. The display will then show either
“
BLOCKED KEYS
”
or
“
FREE KEYS
”
.
N.B.
Availability of the tables depends on the version of the heater. Not all tables will be available
Value
Database
o0
Predefined data 0
o1
Predefined data 1
o2
Predefined data 2
o3
Predefined data 3
o4
Predefined data 4
o5
Predefined data 5
o6
Predefined data 6
o7
Predefined data 7
o8
Predefined data 8
10.1 M
-
9
-
1 Database
The device contains a series of predefined settings called
DATA BANK
. These settings
are available depending on the version of the device, but cannot be modified. This is so
they can be adapted to most types of heaters and prevents the need to enter the parame-
ters one by one.
To access these settings, after entering menu M
-
9
-
1, press P1 or P2 to select the value
(o0, o1, o2, etc.) that you wish to edit from the table (Data Bank). See
figure 64
and the
following table.
figure 64
