Micronova S.r.l.
-
Via A. Niedda, 3
-
35010 Vigonza (PD)
-
+39 049 8931563
-
+39 049 8931346
date 22.05.2018
Control board O047+T047idro
Micronova
page 77 of 113
ENG
U
S
E
R
M
E
N
U
8.8 Menu 08
-
STOVE STATUS
In menu 07, the display will show the status of several variables during the operation of
the stove. The table below shows variables in the display. The same displays are held by
pressing the individual buttons P1, P2, P5, P6 for a few seconds.
figure 47b
8.8 Menu 07
-
FIRST CHARGE
This function is only available when the heater is
OFF
. It allows the feed screw to load at
the first start of the heater when the pellet tank is empty. After selecting the Menu 06, the
display will show as
figure 47a
. Press P1 (to increase). The ventilator will turn on at max-
imum speed, the feed screw will turn on and remain on until the end of the time shown on
the display .
figure 47b
)
figure 47a
page
Button held down
in any states
Visualized parameter
1
1
Time auger pellets load
Thermostat state (apen or close) / Power stove
Timer name loaded
2
2
Fumes temperature
Fumes velocity (rpm)
Air fan velocity (volt)
3
3
Water temperature probe
Water pression
Boiler temperature probe/puffer/ flowmeter state
3 way valve state
4
Timer minutes
4
Timer second
Timer delay alarms
