manualshive.com logo in svg

MicroNet SP5582HTM, User Manual

Share
Download
MicroNet SP5582HTM User Manual Download Page 70

 

69

6.3.11 Storage 

Management 

Users can implement local recording to the Micro SD/SDHC card up to 32GB. 
This page shows the capacity information of the Micro SD card and a recording 
list with all the recording files saved on the memory card. Users can also format 
the SD card and implement automatic recording cleanup through the setting 
page. 

 

To implement Micro SD card recording, please go to the “Recording” page (refer 
to 

6.3.12 Recording

) for activation.

 

 

NOTE:

 Please format the Micro SD/SDHC card when using for the first 

time. Formatting will also be required when a memory card already 
being used on one camera and later transferred to another camera with 
different software platform. 

 

 

 

Device information 

When users insert the Micro SD/SDHC card, the card information such as the 
memory capacity and status will be shown at Device Information section.   
 

Summary of Contents for SP5582HTM



























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands