68
Upload Image by E-Mail
Select this item and the Administrator can assign an e-mail address and
configure various parameters as shown in the figure below. When
tampering is detected, event images will be sent to the appointed e-mail
address.
NOTE:
Make sure SMTP or FTP configuration has been
completed. Refer to
6.3.5 Mail
and
6.3.6 FTP
for further details.
Send HTTP notification
Check this item, select the destination HTTP address, and specify the
parameters for HTTP notifications. When the Tampering Alarm is
triggered, the HTTP notifications can be sent to the specified HTTP
server.
For instance, if the custom parameter is set as”
action=1&group=2
”, and
the HTTP server name is”
http://192.168.0.1/admin.php
”, the notification
will be sent to HTTP server as”
http://192.168.0.1/admin.php?
action=1&group=2
” when alarm is triggered.
File Name
The uploaded image’s filename format can be set in this section. Please select
the one that meets your requirements.
Save
Click the Save button to save all the Tampering Alarm settings mentioned
above.
Summary of Contents for SP5582HTM
