manualshive.com logo in svg

MicroNet SP5582HTM, User Manual

Share
Download
MicroNet SP5582HTM User Manual Download Page 110

 

109

The Security Settings screen is displayed as below: 
 

 

 

Step 5: 

Under “ActiveX controls and plug-ins”, set ALL items (as listed below) to 

 

<Enable> or <Prompt>. Please note that the items vary by IE version.   

 

ActiveX controls and plug-ins settings: 

1.  Allow previously unused ActiveX controls       

    to run without prompt. 

2. Allow 

Scriptlets. 

3.  Automatic prompting for ActiveX controls. 

4.  Binary and script behaviors.   

5.  Display video and animation on a webpage

        that does not use external media player   

6.  Download signed ActiveX controls 

7.  Download unsigned ActiveX controls   

8.  Initialize and script ActiveX controls not   

    marked as safe for scripting  

9.  Run ActiveX controls and plug-ins   

10.  Script ActiveX controls marked safe for   

        scripting

 

 

Summary of Contents for SP5582HTM



























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands