manualshive.com logo in svg

MicroNet SP5582HTM, User Manual

Share
Download
MicroNet SP5582HTM User Manual Download Page 15

 

14 

STEP 4: 

Thread the power and Ethernet 
cables through either the Side 
Conduit Entry or Back Conduit 
Entry. Then fasten the Dome 
Camera’s Housing on the Electrical 
Box with the two screws.

 

 

STEP 5: 

Connect the power and Ethernet cables to their connectors on the Camera 
Module. 

 

STEP 6: 

Attach the Snap-on Camera Module onto the Dome Camera’s Housing 
and. Screw the Module-fastened Screw tightly to secure the Camera 
Module. 
 

STEP 7: 

Access the camera browser-viewer for viewing images. Please refer to 

6. 

Accessing Camera

 for further details. Users can also use the Camera’s 

BNC Connector for video output. 

 

Step 8: 

Adjust the Camera's zoom level and focal length via Zoom and Focus Ring 
Screws. 

 

STEP 9: 

Position the Camera at a desired angle by Pan/Tilt/Rotation adjustment.

 

 

STEP 10: 

Replace the Dome Cover back, aligning the arrow mark on the Dome Cover 
with the one on the Housing. 

 

Summary of Contents for SP5582HTM



























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands