manualshive.com logo in svg

MicroNet SP5582HTM, User Manual

Share
Download
MicroNet SP5582HTM User Manual Download Page 100

 

99

6.5.1 Exposure 

The Exposure pull-down menu is shown as follows: 
 

 

 
The exposure is the amount of light received by the image sensor and is 
determined by the width of lens diaphragm opening, the amount of exposure by 
the sensor (shutter speed) and other exposure parameters. With this item, users 
can define how the Auto Exposure function works.   
 
Each exposure mode is specified as follows: 

 

Full Auto Mode 

In this mode, the camera’s Shutter Speed, IRIS and AGC (Auto Gain Control) 
control circuits work together automatically to get consistent video output level.   
The shutter speed range is from 1 (1/1.5) to 1/30 (1/25) sec. with 6 (5) options. 
Users could select suitable shutter speed according to the environmental 
illuminance. 

 

NOTE:

 The minimum shutter speed set in the Full Auto Mode will be 

applied to 

Auto Iris Mode

. 

 

Auto Iris 

In this mode, the exposure gives priority to the auto iris. Shutter speed and AGC 
circuit will function automatically in cooperating with IRIS to get consistent 
exposure output.   

 

NOTE: 

The minimum shutter speed will vary depending on the setting in 

Full Auto Mode

.

 

 

Summary of Contents for SP5582HTM



























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands