Microframe Corporation
6
604 South 12
th
Street
Broken Arrow, OK 74012
800-635-3811
www.microframecorp.com
Series 6300XXX8
Time of Day Clock
(See Clock Detailed Instructions for more information.)
1.
Using the remote control, press [MENU] “160” [ENTER].
2. Type
“1345” [ENTER] to set the time as 1:45pm.
Count Up / Count Down Timer
(See Count UP / DOWN Timer Detailed Instructions for more
information.)
This is used to time an event, and can show the time to 1/100
th
of a second.
1.
To count UP, using the remote control, press [MENU] “211” [ENTER].
2. To
count DOWN, using the remote control, press [MENU] “212” [ENTER].
3. Type the number followed by [ENTER] to set the time or count.
4. Press [UP] or [DOWN] to START or STOP the timer.
Unit Counter
(See Counter Detailed Instructions for more information.)
This is
used to count the number of “contact closures” occurring at Input 1.
1.
Using the remote control, press [MENU] “167” [ENTER].
2. Type the number followed by [ENTER] to set count.
3. Press [UP] to increment or [DOWN] to decrement.
Takt Timer
(See Takt Time Detailed Instructions for more information.)
This is used to increment a running count at a specific time interval, and is generally used to set a target
pace on a production line.
1.
Using the remote control, press [MENU] “168” [ENTER]. This will set the display at a default Takt
interval of 15 seconds.
2. Type the number followed by [ENTER] to set count.
3. Press [DOWN] to START or STOP the Takt time.
QUICK Settings
Start here to set up your Timer / Counter Mode.