Microframe Corporation
15
604 South 12
th
Street
Broken Arrow, OK 74012
800-635-3811
www.microframecorp.com
Series 6300XXX8
Setup
1.1 Set Current Time
Sets the internal clock's time. Since this display does not have AM/PM indicators, time must be entered in military
format, e.g., 3 p.m. = 15:00.
•
Prompt
Wall Clock (2.1.0)
HH:MM [ENTER] -or- HH:MM:SS [ENTER]
Any other (2.1.x)
HH:MM:SS [ENTER]
HH=hours, MM=minutes, SS=seconds
1.2 Set Current Date
Sets the internal clock's date.
•
Prompt
MM / DD / YY
MM=month, DD=day, YY=year
The RTC and firmware in this product will operate in the year range 2000-2099 (01/01/00-12/31/99).
1.3 Set Reload Time / Interval
Sets the countdown timer's reload time or interval. Any time the countdown timer is reset, it will go back to this value.
•
Prompt
Time format (2.3.0)
HH:MM:SS [ENTER], DDDD [ENTER]
Interval format (2.3.1)
NNNNNN [ENTER]
HH=hours, MM=minutes, SS=seconds, DDDD=days
N=quantity of the set interval unit
This option also serves as the Takt time interval.
•
Prompt
TAKT time (2.1.5)
HH:MM:SS [ENTER], DDDD [ENTER]
HH=hours, MM=minutes, SS=seconds, DDDD=days
If you wish to set hundredths of seconds for the reload time, first change the display mode to interval (2.3.1)
and the interval unit to hundredths of seconds (2.4.0).
1.4 Set Chime 1 Time / Interval
Sets a specific chime time/interval for wall clock and timer modes. When the current time/interval matches this value,
the internal and external chimes will be activated (if enabled).
•
Prompt
Time format (2.3.0)
HH:MM:SS [ENTER], DDDD [ENTER] Interval format (2.3.1)
NNNNNN [ENTER]
HH=hours, MM=minutes, SS=seconds, DDDD=days
N=quantity of the set interval unit
1.5 Set Chime 2 Time / Interval
A second chime time/interval. Entry is the same as 1.4.
Options Definitions
Helpful information about all of the choices shown in the Options Table
Summary.