MICROENER IM30-CV, Operation Manual

Page: 22 / 24

IM30-CV
Doc. N° MO-0150-ING
Rev. 1
Date 14.07.2003
Copyright 2010 - Microener Firmware: 1.0X Pag 22 di 24
24. DI
RECTION FOR PCB’S DRAW-OUT AND PLUG-IN
22.1 DRAW-OUT
Rotate clockwise the screws

and

in the horizontal position of the screws-driver mark.
Draw-out the PCB by pulling on the handle

22.2 PLUG-IN
Rotate clockwise the screws

and

in the horizontal position of the screws-driver mark.
Slide-in the card on the rails provided inside the enclosure.
Plug-in the card completely and by pressing the handle to the closed position.
Rotate anticlockwise the screws

and

with the mark in the vertical position (locked).