MICROENER IM30-CV, Operation Manual

Page: 17 / 24

IM30-CV
Doc. N° MO-0150-ING
Rev. 1
Date 14.07.2003
Copyright 2010 - Microener Firmware: 1.0X Pag 17 di 24
16. ELECTRICAL CHARACTERISTICS
APPROVAL: CE
– RINA – UL and CSA approval File : E202083
REFERENCE STANDARDS IEC 60255 - EN50263 - CE Directive - EN/IEC61000 - IEEE C37

Dielectric test voltage IEC 60255-5 2kV, 50/60Hz, 1 min.

Impulse test voltage
IEC 60255-5 : 5kV (c.m.), 2 kV (d.m.) - 1,2/50

s 5kV (c.m.), 2kV (d.m.)
– 1,2/50

s

Insulation resistance
> 100M

Environmental Std. Ref. (IEC 68-2-1 - 68-2-2 - 68-2-33)

Operation ambient temperature -10°C / +55°C

Storage temperature -25°C / +70°C

Humidity IEC68-2-3 RH 93% Without Condensing AT 40°C
CE EMC Compatibility (EN50081-2 - EN50082-2 - EN50263)

Electromagnetic emission EN55022 industrial environment

Radiated electromagnetic field immunity test IEC61000-4-3 level 3 80-1000MHz 10V/m
ENV50204 900MHz/200Hz 10V/m

Conducted disturbances immunity test IEC61000-4-6 level 3 0.15-80MHz 10V

Electrostatic discharge test IEC61000-4-2 level 4 6kV contact / 8kV air

Power frequency magnetic test IEC61000-4-8 1000A/m 50/60Hz

Pulse magnetic field IEC61000-4-9
1000A/m, 8/20

s

Damped oscillatory magnetic field IEC61000-4-10 100A/m, 0.1-1MHz

Electrical fast transient/burst IEC61000-4-4 level 3 2kV, 5kHz

HF disturbance test with damped oscillatory wave (1MHz
burst test)
IEC60255-22-1 class 3 400pps, 2,5kV (m.c.), 1kV (d.m.)

Oscillatory waves (Ring waves) IEC61000-4-12 level 4 4kV(c.m.), 2kV(d.m.)

Surge immunity test IEC61000-4-5 level 4 2kV(c.m.), 1kV(d.m.)

Voltage interruptions IEC60255-4-11

Resistance to vibration and shocks IEC60255-21-1 - IEC60255-21-2 10-500Hz 1g
CHARACTERISTICS

Accuracy at reference value of influencing factors 2% Rated Input for trip levels
2% +/- 10ms for times

Rated input Current In = 1 or 5A ; On = 1 or 5A

Current overload 200 A for 1 sec; 10A continuous

Burden on current inputs
Phase : 0.01VA at In = 1A; 0.2VA at In = 5A
Neutral : 0.03VA at In = 1A; 0.2VA at In = 5A

Rated input Voltage Un = 50
– 125V

Voltage overload 2 Un

Burden on voltage input 0,08 VA at Un

Average power supply consumption 8.5 VA

Output relays
rating 5 A; Vn = 380 V
A.C. resistive switching = 1100W (380V max)
make = 30 A (peak) 0,5 sec.
break = 0.3 A, 110 Vcc,
L/R = 40 ms (100.000 op.)
Microelettrica Scientifica S.p.A. - 20089 Rozzano (MI) - Italy - Via Alberelle, 56/68
Tel. (##39) 02 575731 - Fax (##39) 02 57510940
http://www.microelettrica.com
e-mail :
ute@microelettrica.com
The performances and the characteristics reported in this manual are not binding and can modified at any moment without notice