Microelettrica Scientifica MC2-30M, Operation Manual

Page: 18 / 64

MC2-30M
Doc. N°
MO-0495-ING
Copyright 2018 Date 17.03.2022 Rev. 2 Pag. 18 of 64
9. Local Commands
“ Local Commands ” allow to operate from relay front face controls like Thermal Memory reset, Leds reset, etc.
Menu Description Password
Led Clear Reset of signal Leds No
Relays Clear Manual reset of output relays No
main C/B Cl. Manual C/B closing (conditioned by Password) Yes
main C/B Op. Manual C/B opening (conditioned by Password) Yes
Event Clear Reset Events Yes
LTrip Clear Reset Last Trip Yes
Counter Clear Reset Counters Yes
HistFail Clear Reset of Internal Failure Historic records Yes
Reset StNo Reset of the Starts Number Yes
Reset Term Reset to zero of the accumulations relevant to Thermal Image and
Interruption Energy (only if T> is enable)
Yes
Leds Test Signal Leds test No
Force Osc Force Oscillo Recording Yes
Format iDisk Format internal disk Yes
Check iDisk Check internal disk Yes
To operate one command by the Front Face Keyboard, proceed as follows (Led Clear in the present example).
1
• Press “ Menu ” for access to the main menu with icons.
2
•
Select “ LocalCmd ” icon with pushbutton “ Increase ” or “ Decrease ”.
• Press “ Select ” for access.
3 • Select with pushbutton “ Increase ” or “ Decrease ” the menu “ LedClear ”.
•
Press “ Select ” to execute the command.
(if Password is request, see § Password).
4
•
When command has been executed the display shows
“ Command Done ”; go to “ 3 ”.