Microelettrica Scientifica MC2-30M, Operation Manual

Page: 30 / 64

MC2-30M
Doc. N°
MO-0495-ING
Copyright 2018 Date 17.03.2022 Rev. 2 Pag. 30 of 64
17.2 - Password
The password is requested any time the user wishes to modify any password protected parameter
(example “1I>” menu “Setting”).
The factory default password is “1111”.
The password is only modifiable with the software.
When password is requested, proceed as follows:
1 Use the key “ Increase ” and
“ Decrease ” and set the
first digit of password.
5 Use the key “ Increase ” or
“ Decrease ” to set the
third digit.
2 Press “ Next ”
to validate and go to the
next digit.
6 Press “ Next ”
to validate and go to the
next digit.
3 Use the key “ Increase ” or
“ Decrease ” to set second
digit.
7 Use the key “ Increase ” or
“ Decrease ” to set the
fourth digit.
4
Press “ Next ”
to validate and go to the
next digit.
8
Press “ Next ”
to validate and go to
modify the next
parameter.
By key “ Prev ” go back to previous digit.
The password validity expires 60 sec after the last
setting modification or as soon as you go back to the
main menu
1 If set the incorrect password
the display shows
“ Wrong code ”.
2 The display will repeat the
initial interrogation