Microcom 428TC plus, Operator'S Manual

Page: 200 / 239

Troubleshooting Chapter 11
11-2 428TC Operator’s Manual - 880041-0141
The status indicator light is solid amber in color:
 Indicates that the printer has been paused or a tag/tear mode is being used.
 Press the print button; light should turn green and resume printing if the printer has
been paused.
 Remove the tag, the light should turn green if a tag/tear mode is enabled
 Contact your Service Representative.
The status indicator light is solid red in color:
 The printer has an error and requires service before printing will continue.
 Verify that media has been loaded in the printer properly.
 Press the print button to attempt to clear the error.

Refer to Chapter 5 for information regarding the Enquiry Command to help identify
the error condition.
 Cycle power to reset the printer.
The status indicator light is flashing red in color:
 Generally due to a power fail error.

Verify that the AC line-voltage is present at the AC outlet.
 Refer to Chapter 5 for information regarding the Enquiry Command to help identify
the error condition.
 Cycle power.
During download the status indicator light flashes red in color:

The file contains an illegal operation / command.
 The graphic or font is not valid or has errors.
 The intended memory slot is already occupied.
 Verify that the printer is properly configured for the type of download being sent.
 Clear memory and attempt download again.

Verify that the format has been created properly.